Free variables and bound variables

For bound variables in computer programming, see Name binding.

"Free variable" redirects here. It is not to be confused with Free parameter.

In mathematics, and in other disciplines involving formal languages, including mathematical logic and computer science, a free variable is a notation (symbol) that specifies places in an expression where substitution may take place and is not a parameter of this or any container expression. Some older books use the terms real variable and apparent variable for free variable and bound variable. The idea is related to a placeholder (a symbol that will later be replaced by some literal string), or a wildcard character that stands for an unspecified symbol.

In computer programming, the term free variable refers to variables used in a function that are neither local variables nor parameters of that function. The term non-local variable is often a synonym in this context.

A bound variable is a variable that was previously free, but has been bound to a specific value or set of values called domain of discourse or universe. For example, the variable x becomes a bound variable when we write:

'For all x, (x + 1)² = x² + 2x + 1.'

or

'There exists x such that x² = 2.'

In either of these propositions, it does not matter logically whether we use x or some other letter. However, it could be confusing to use the same letter again elsewhere in some compound proposition. That is, free variables become bound, and then in a sense retire from being available as stand-in values for other values in the creation of formulae.

The term "dummy variable" is also sometimes used for a bound variable (more often in general mathematics than in computer science), but that use can create an ambiguity with the definition of dummy variables in regression analysis.

Examples

Before stating a precise definition of free variable and bound variable, the following are some examples that perhaps make these two concepts clearer than the definition would:

In the expression

$\sum _{k=1}^{10}f(k,n),$

n is a free variable and k is a bound variable; consequently the value of this expression depends on the value of n, but there is nothing called k on which it could depend.

In the expression

$\int _{0}^{\infty }x^{y-1}e^{-x}\,dx,$

y is a free variable and x is a bound variable; consequently the value of this expression depends on the value of y, but there is nothing called x on which it could depend.

In the expression

$\lim _{h\rightarrow 0}{\frac {f(x+h)-f(x)}{h}},$

x is a free variable and h is a bound variable; consequently the value of this expression depends on the value of x, but there is nothing called h on which it could depend.

In the expression

$\forall x\ \exists y\ {\Big [}\varphi (x,y,z){\Big ]},$

z is a free variable and x and y are bound variables; consequently the logical value of this expression depends on the value of z, but there is nothing called x or y on which it could depend.

Variable-binding operators

The following

$\sum _{x\in S}\quad \quad \prod _{x\in S}\quad \quad \int _{0}^{\infty }\cdots \,dx\quad \quad \lim _{x\to 0}\quad \quad \forall x\quad \quad \exists x$

are some common variable-binding operators. Each of them binds the variable x for some set S.

Note that many of these are operators which act on functions of the bound variable. In more complicated contexts, such notations can become awkward and confusing. It can be useful to switch to notations which make the binding explicit, such as

$\sum _{1,\ldots ,10}\left(k\mapsto f(k,n)\right)$

for sums or

$D\left(x\mapsto x^{2}+2x+1\right)$

for differentiation.

Formal explanation

Tree summarizing the syntax of the expression $\forall x\,((\exists y\,A(x))\vee B(z))$

Variable-binding mechanisms occur in different contexts in mathematics, logic and computer science. In all cases, however, they are purely syntactic properties of expressions and variables in them. For this section we can summarize syntax by identifying an expression with a tree whose leaf nodes are variables, constants, function constants or predicate constants and whose non-leaf nodes are logical operators. This expression can then be determined by doing an inorder traversal of the tree. Variable-binding operators are logical operators that occur in almost every formal language. Languages that do not have them may be either extremely inexpressive or extremely difficult to use. A binding operator Q takes two arguments: a variable v and an expression P, and when applied to its arguments produces a new expression Q(v, P). The meaning of binding operators is supplied by the semantics of the language and does not concern us here.

Variable binding relates three things: a variable v, a location a for that variable in an expression and a non-leaf node n of the form Q(v, P). Note: we define a location in an expression as a leaf node in the syntax tree. Variable binding occurs when that location is below the node n.

In the lambda calculus, x is a bound variable in the term M = λx. T, and a free variable of T. We say x is bound in M and free in T. If T contains a subterm λx. U then x is rebound in this term. This nested, inner binding of x is said to "shadow" the outer binding. Occurrences of x in U are free occurrences of the new x.

Variables bound at the top level of a program are technically free variables within the terms to which they are bound but are often treated specially because they can be compiled as fixed addresses. Similarly, an identifier bound to a recursive function is also technically a free variable within its own body but is treated specially.

A closed term is one containing no free variables.

Function expressions

To give an example from mathematics, consider an expression which defines a function

$f=\left[(x_{1},\ldots ,x_{n})\mapsto \operatorname {t} \right]$

where t is an expression. t may contain some, all or none of the x₁, ..., x_n and it may contain other variables. In this case we say that function definition binds the variables x₁, ..., x_n.

In this manner, function definition expressions of the kind shown above can be thought of as the variable binding operator, analogous to the lambda expressions of lambda calculus. Other binding operators, like the summation sign, can be thought of as higher-order functions applying to a function. So, for example, the expression

$\sum _{x\in \mathbb {A} }{x^{2}}$

could be treated as a notation for

$\sum _{\mathbb {A} }{(x\mapsto x^{2})}$

where $\sum _{\mathbb {S} }{f}$ is an operator with two parameters—a one-parameter function, and a set to evaluate that function over. The other operators listed above can be expressed in similar ways; for example, the universal quantifier $\forall x\in \mathbb {S} \ P(x)$ can be thought of as an operator that evaluates to the logical conjunction of the boolean-valued function P applied over the (possibly infinite) set S.

Natural language

When analyzed in formal semantics, natural languages can be seen to have free and bound variables. In English, personal pronouns like he, she, they, etc. can act as free variables.

Lisa found her book.

In the sentence above, the possessive pronoun her is a free variable. It may refer to the previously mentioned Lisa or to any other female. In other words, her book could be referring to Lisa's book (an instance of coreference) or to a book that belongs to a different female (e.g. Jane's book). Whoever the referent of her is can be established according to the situational (i.e. pragmatic) context. The identity of the referent can be shown using coindexing subscripts where i indicates one referent and j indicates a second referent (different from i). Thus, the sentence Lisa found her book has the following interpretations:

Lisa_i found her_i book. (interpretation #1: her = of Lisa)

Lisa_i found her_j book. (interpretation #2: her = of a female that is not Lisa)

The distinction is not purely of academic interest, as some languages do actually have different forms for her_i and her_j: for example, Norwegian and Swedish translates coreferent her_i as sin and noncoreferent her_j as hennes.

English does allow specifying coreference, but it is optional, as both interpretations of the previous example are valid (the ungrammatical interpretation is indicated with an asterisk):

Lisa_i found her_i own book. (interpretation #1: her = of Lisa)

*Lisa_i found her_j own book. (interpretation #2: her = of a female that is not Lisa)

However, reflexive pronouns, such as himself, herself, themselves, etc., and reciprocal pronouns, such as each other, act as bound variables. In a sentence like the following:

Jane hurt herself.

the reflexive herself can only refer to the previously mentioned antecedent Jane. It can never refer to a different female person. In other words, the person being hurt and the person doing the hurting are both the same person, i.e. Jane. The semantics of this sentence is abstractly: JANE hurt JANE. And it cannot be the case that this sentence could mean JANE hurt LISA. The reflexive herself must refer and can only refer to the previously mentioned Jane. In this sense, the variable herself is bound to the noun Jane that occurs in subject position. Indicating the coindexation, the first interpretation with Jane and herself coindexed is permissible, but the other interpretation where they are not coindexed is ungrammatical:

Jane_i hurt herself_i. (interpretation #1: herself = Jane)

*Jane_i hurt herself_j. (interpretation #2: herself = a female that is not Jane)

Note that the coreference binding can be represented using a lambda expression as mentioned in the previous Formal explanation section. The sentence with the reflexive could be represented as

(λx.x hurt x)Jane

in which Jane is the subject referent argument and λx.x hurt x is the predicate function (a lambda abstraction) with the lambda notation and x indicating both the semantic subject and the semantic object of sentence as being bound. This returns the semantic interpretation JANE hurt JANE with JANE being the same person.

Pronouns can also behave in a different way. In the sentence below

Ashley hit her.

the pronoun her can only refer to a female that is not Ashley. This means that it can never have a reflexive meaning equivalent to Ashley hit herself. The grammatical and ungrammatical interpretations are:

*Ashley_i hit her_i. (interpretation #1: her = Ashley)

Ashley_i hit her_j. (interpretation #2: her = a female that is not Ashley)

The first interpretation is impossible. Only the second interpretation is permitted by the grammar.

Thus, it can be seen that reflexives and reciprocals are bound variables (known technically as anaphors) while true pronouns are free variables in some grammatical structures but variables that cannot be bound in other grammatical structures. The binding phenomena found in natural languages was particularly important to the syntactic government and binding theory (see also: Binding (linguistics)).

See also

• Closure (computer science)
• Combinatory logic
• Lambda lifting
• Name binding
• Scope (programming)

References

• Thompson, Simon (1991). Type theory and functional programming. Wokingham, England: Addison-Wesley. ISBN 0201416670. OCLC 23287456.