Inequality (mathematics)

From Wikipedia, the free encyclopedia
  (Redirected from Greater than)
Jump to navigation Jump to search
The feasible regions of linear programming are defined by a set of inequalities.

In mathematics, an inequality is a relation that holds between two values when they are different (see also: equality).

  • The notation ab means that a is not equal to b.
It does not say that one is greater than the other, or even that they can be compared in size.

If the values in question are elements of an ordered set, such as the integers or the real numbers, they can be compared in size.

  • The notation a < b means that a is less than b.
  • The notation a > b means that a is greater than b.
In either case, a is not equal to b. These relations are known as strict inequalities. The notation a < b may also be read as "a is strictly less than b".

In contrast to strict inequalities, there are two types of inequality relations that are not strict:

  • The notation ab or ab means that a is less than or equal to b (or, equivalently, not greater than b, or at most b); "not greater than" can also be represented by ab, the symbol for "greater than" bisected by a vertical line, "not". (The Unicode characters are: U+2264 LESS-THAN OR EQUAL TO, U+2A7D LESS-THAN OR SLANTED EQUAL TO, and U+226F NOT GREATER-THAN.)
  • The notation ab or ab means that a is greater than or equal to b (or, equivalently, not less than b, or at least b); "not less than" can also be represented by ab, the symbol for "less than" bisected by a vertical line, "not". (The Unicode characters are: U+2265 GREATER-THAN OR EQUAL TO, U+2A7E GREATER-THAN OR SLANTED EQUAL TO, and U+226E NOT LESS-THAN.)

In engineering sciences, a less formal use of the notation is to state that one quantity is "much greater" than another, normally by several orders of magnitude. This implies that the lesser value can be neglected with little effect on the accuracy of an approximation. (For example, the ultrarelativistic limit in physics.)

  • The notation ab means that a is much less than b. (In measure theory, however, this notation is used for absolute continuity, an unrelated concept.)
  • The notation ab means that a is much greater than b.

Properties[edit]

Inequalities are governed by the following properties. All of these properties also hold if all of the non-strict inequalities (≤ and ≥) are replaced by their corresponding strict inequalities (< and >) and (in the case of applying a function) monotonic functions are limited to strictly monotonic functions.

Transitivity[edit]

The transitive property of inequality states:

  • For any real numbers a, b, c:
    • If ab and bc, then ac.
    • If ab and bc, then ac.
  • If either of the premises is a strict inequality, then the conclusion is a strict inequality:
    • If ab and b > c, then a > c.
    • If a > b and bc, then a > c.
  • Since a = b implies ab these imply:
    • If a = b and b > c, then a > c.
    • If a > b and b = c, then a > c.

Converse[edit]

The relations ≤ and ≥ are each other's converse:

  • For any real numbers a and b:
    • If ab, then ba.
    • If ab, then ba.

Addition and subtraction[edit]

If x < y, then x + a < y + a.

A common constant c may be added to or subtracted from both sides of an inequality:

  • For any real numbers a, b, c
    • If ab, then a + cb + c and acbc.
    • If ab, then a + cb + c and acbc.

i.e., the real numbers are an ordered group under addition.

Multiplication and division[edit]

If x < y and a > 0, then ax < ay.
If x < y and a < 0, then ax > ay.

The properties that deal with multiplication and division state:

  • For any real numbers, a, b and non-zero c:
    • If c is positive, then multiplying or dividing by c does not change the inequality:
      • If ab and c > 0, then acbc and a/cb/c.
      • If ab and c > 0, then acbc and a/cb/c.
    • If c is negative, then multiplying or dividing by c inverts the inequality:
      • If ab and c < 0, then acbc and a/cb/c.
      • If ab and c < 0, then acbc and a/cb/c.

More generally, this applies for an ordered field; see #Ordered fields.

Additive inverse[edit]

The properties for the additive inverse state:

  • For any real numbers a and b, negation inverts the inequality:
    • If ab, then −a ≥ −b.
    • If ab, then −a ≤ −b.

Multiplicative inverse[edit]

The properties for the multiplicative inverse state:

  • For any non-zero real numbers a and b that are both positive or both negative:
    • If ab, then 1/a ≥ 1/b.
    • If ab, then 1/a ≤ 1/b.
  • If one of a and b is positive and the other is negative, then:
    • If a < b, then 1/a < 1/b.
    • If a > b, then 1/a > 1/b.

These can also be written in chained notation as:

  • For any non-zero real numbers a and b:
    • If 0 < ab, then 1/a ≥ 1/b > 0.
    • If ab < 0, then 0 > 1/a ≥ 1/b.
    • If a < 0 < b, then 1/a < 0 < 1/b.
    • If 0 > ab, then 1/a ≤ 1/b < 0.
    • If ab > 0, then 0 < 1/a ≤ 1/b.
    • If a > 0 > b, then 1/a > 0 > 1/b.

Applying a function to both sides[edit]

The graph of y = ln x

Any monotonically increasing function may be applied to both sides of an inequality (provided they are in the domain of that function) and it will still hold. Applying a monotonically decreasing function to both sides of an inequality means the opposite inequality now holds. The rules for the additive inverse, and the multiplicative inverse for positive numbers, are both examples of applying a monotonically decreasing function.

If the inequality is strict (a < b, a > b) and the function is strictly monotonic, then the inequality remains strict. If only one of these conditions is strict, then the resultant inequality is non-strict. The rules for additive and multiplicative inverses are both examples of applying a strictly monotonically decreasing function.

A few examples of this rule are:

  • Exponentiating both sides of an inequality by n > 0 when a and b are positive real numbers:
abanbn.
abanbn.
  • Taking the natural logarithm to both sides of an inequality when a and b are positive real numbers:
ab ⇔ ln(a) ≤ ln(b).
a < b ⇔ ln(a) < ln(b).
This is true because the natural logarithm is a strictly increasing function.

Ordered fields[edit]

If (F, +, ×) is a field and ≤ is a total order on F, then (F, +, ×, ≤) is called an ordered field if and only if:

  • ab implies a + cb + c;
  • 0 ≤ a and 0 ≤ b implies 0 ≤ a × b.

Note that both (Q, +, ×, ≤) and (R, +, ×, ≤) are ordered fields, but ≤ cannot be defined in order to make (C, +, ×, ≤) an ordered field, because −1 is the square of i and would therefore be positive.

The non-strict inequalities ≤ and ≥ on real numbers are total orders. That is, given arbitrary a, bR, at least one of ab and ba holds; at the same time, at least one of ab and ba holds. The strict inequalities < and > on real numbers are strict total orders. That is, < on R has trichotomy property: given arbitrary a, bR, exactly one of a < b, b < a and a = b is true; likewise, > on R has the trichotomy property.

Chained notation[edit]

The notation a < b < c stands for "a < b and b < c", from which, by the transitivity property above, it also follows that a < c. By the above laws, one can add or subtract the same number to all three terms, or multiply or divide all three terms by same nonzero number and reverse all inequalities if that number is negative. Hence, for example, a < b + e < c is equivalent to ae < b < ce.

This notation can be generalized to any number of terms: for instance, a1a2 ≤ ... ≤ an means that aiai+1 for i = 1, 2, ..., n − 1. By transitivity, this condition is equivalent to aiaj for any 1 ≤ ijn.

When solving inequalities using chained notation, it is possible and sometimes necessary to evaluate the terms independently. For instance, to solve the inequality 4x < 2x + 1 ≤ 3x + 2, it is not possible to isolate x in any one part of the inequality through addition or subtraction. Instead, the inequalities must be solved independently, yielding x < 1/2 and x ≥ −1 respectively, which can be combined into the final solution −1 ≤ x < 1/2.

Occasionally, chained notation is used with inequalities in different directions, in which case the meaning is the logical conjunction of the inequalities between adjacent terms. For instance, a < b = cd means that a < b, b = c, and cd. This notation exists in a few programming languages such as Python.

Sharp inequalities[edit]

An inequality is said to be sharp, if it cannot be relaxed and still be valid in general. Formally, a universally quantified inequality φ is called sharp if, for every valid universally quantified inequality ψ, if ψ φ holds, then ψ φ also holds. For instance, the inequality a. a2 ≥ 0 is sharp, whereas the inequality a ∈ ℝ. a2 ≥ −1 is not sharp.[citation needed]

Inequalities between means[edit]

There are many inequalities between means. For example, for any positive numbers a1, a2, …, an we have HGAQ, where

(harmonic mean),
(geometric mean),
(arithmetic mean),
(quadratic mean).

Power inequalities[edit]

A "power inequality" is an inequality containing terms of the form ab, where a and b are real positive numbers or variable expressions. They often appear in mathematical olympiads exercises.

Examples[edit]

  • For any real x,
  • If x > 0 and p > 0, then
In the limit of p → 0, the upper and lower bounds converge to ln(x).
  • If x > 0, then
  • If x ≥ 1, then
  • If x, y, z > 0, then
  • For any real distinct numbers a and b,
  • If x, y > 0 and 0 < p < 1, then
  • If x, y, z > 0, then
  • If a, b > 0, then
This inequality was solved by I.Ilani in JSTOR,AMM,Vol.97,No.1,1990.
  • If a, b > 0, then
This inequality was solved by S.Manyama in AJMAA,Vol.7,Issue 2,No.1,2010 and by V.Cirtoaje in JNSA, Vol.4, Issue 2, 130–137, 2011.
  • If a, b, c > 0, then
  • If a, b > 0, then

Well-known inequalities[edit]

Mathematicians often use inequalities to bound quantities for which exact formulas cannot be computed easily. Some inequalities are used so often that they have names:

Complex numbers and inequalities[edit]

The set of complex numbers with its operations of addition and multiplication is a field, but it is impossible to define any relation ≤ so that becomes an ordered field. To make an ordered field, it would have to satisfy the following two properties:

  • if ab, then a + cb + c;
  • if 0 ≤ a and 0 ≤ b, then 0 ≤ a b.

Because ≤ is a total order, for any number a, either 0 ≤ a or a ≤ 0 (in which case the first property above implies that 0 ≤ −a). In either case 0 ≤ a2; this means that and ; so and , which means ; contradiction.

However, an operation ≤ can be defined so as to satisfy only the first property (namely, "if ab, then a + cb + c"). Sometimes the lexicographical order definition is used:

  • , if or and

It can easily be proven that for this definition ab implies a + cb + c.

Vector inequalities[edit]

Inequality relationships similar to those defined above can also be defined for column vectors. If we let the vectors (meaning that and , where and are real numbers for ), we can define the following relationships:

  • , if for .
  • , if for .
  • , if for and .
  • , if for .

Similarly, we can define relationships for , , and . We note that this notation is consistent with that used by Matthias Ehrgott in Multicriteria Optimization (see References).

The trichotomy property (as stated above) is not valid for vector relationships. For example, when and , there exists no valid inequality relationship between these two vectors. Also, a multiplicative inverse would need to be defined on a vector before this property could be considered. However, for the rest of the aforementioned properties, a parallel property for vector inequalities exists.

General existence theorems[edit]

For a general system of polynomial inequalities, one can find a condition for a solution to exist. Firstly, any system of polynomial inequalities can be reduced to a system of quadratic inequalities by increasing the number of variables and equations (for example, by setting a square of a variable equal to a new variable). A single quadratic polynomial inequality in n − 1 variables can be written as

where X is a vector of the variables , and A is a matrix. This has a solution, for example, when there is at least one positive element on the main diagonal of A.

Systems of inequalities can be written in terms of matrices A, B, C, etc., and the conditions for existence of solutions can be written as complicated expressions in terms of these matrices. The solution for two polynomial inequalities in two variables tells us whether two conic section regions overlap or are inside each other. The general solution is not known, but such a solution could be theoretically used to solve such unsolved problems as the kissing number problem. However, the conditions would be so complicated as to require a great deal of computing time or clever algorithms.

See also[edit]

References[edit]

  • Hardy, G., Littlewood J. E., Pólya, G. (1999). Inequalities. Cambridge Mathematical Library, Cambridge University Press. ISBN 0-521-05206-8.CS1 maint: Multiple names: authors list (link)
  • Beckenbach, E. F., Bellman, R. (1975). An Introduction to Inequalities. Random House Inc. ISBN 0-394-01559-2.CS1 maint: Multiple names: authors list (link)
  • Drachman, Byron C., Cloud, Michael J. (1998). Inequalities: With Applications to Engineering. Springer-Verlag. ISBN 0-387-98404-6.CS1 maint: Multiple names: authors list (link)
  • Grinshpan, A. Z. (2005), "General inequalities, consequences, and applications", Advances in Applied Mathematics, 34 (1): 71–100, doi:10.1016/j.aam.2004.05.001
  • Murray S. Klamkin. "'Quickie' inequalities" (PDF). Math Strategies.
  • Arthur Lohwater (1982). "Introduction to Inequalities". Online e-book in PDF format.
  • Harold Shapiro (2005, 1972–1985). "Mathematical Problem Solving". The Old Problem Seminar. Kungliga Tekniska högskolan. Check date values in: |date= (help)
  • "3rd USAMO". Archived from the original on 2008-02-03.
  • Pachpatte, B. G. (2005). Mathematical Inequalities. North-Holland Mathematical Library. 67 (first ed.). Amsterdam, The Netherlands: Elsevier. ISBN 0-444-51795-2. ISSN 0924-6509. MR 2147066. Zbl 1091.26008.
  • Ehrgott, Matthias (2005). Multicriteria Optimization. Springer-Berlin. ISBN 3-540-21398-8.
  • Steele, J. Michael (2004). The Cauchy-Schwarz Master Class: An Introduction to the Art of Mathematical Inequalities. Cambridge University Press. ISBN 978-0-521-54677-5.

External links[edit]