Test card

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
SMPTE color bars: common NTSC test pattern
PM5544: common PAL test pattern

A test card, also known as a test pattern or start-up/closedown test, is a television test signal, typically broadcast at times when the transmitter is active but no program is being broadcast (often at sign-on and sign-off). Used since the earliest TV broadcasts, test cards were originally physical cards at which a television camera was pointed, and such cards are still often used for calibration, alignment, and matching of cameras and camcorders. Test patterns used for calibrating or troubleshooting the downstream signal path are these days generated by test signal generators, which do not depend on the correct configuration (and presence) of a camera. Digitally generated cards allow vendors, viewers and television stations to adjust their equipment for optimal functionality. The audio broadcast while test cards are shown is typically a sine wave tone, radio (if associated or affiliated with the television channel) or music (usually instrumental, though some also broadcast with jazz or popular music).

Technical details[edit]

Test cards typically contain a set of patterns to enable television cameras and receivers to be adjusted to show the picture correctly (See SMPTE color bars). Most modern test cards include a set of calibrated colour bars which will produce a characteristic pattern of "dot landings" on a vectorscope, allowing chroma and tint to be precisely adjusted between generations of videotape or network feeds. SMPTE bars—and several other test cards—include analog black (a flat waveform at 7.5 IRE, or the NTSC setup level), full white (100 IRE), and a "sub-black", or "blacker-than-black" (at 0 IRE), which represents the lowest low-frequency transmission voltage permissible in NTSC broadcasts (though the negative excursions of the colourburst signal may go below 0 IRE). Between the colour bars and proper adjustment of brightness and contrast controls to the limits of perception of the first sub-black bar, an analogue receiver (or other equipment such as VTRs) can be adjusted to provide impressive fidelity.

History[edit]

The famous RCA Indian-head test pattern used mainly in North America from 1940 to the 1970s with its elements labeled, describing the use of each element in aligning a black & white analog TV receiver.
A 1952 Philips TD1410U television set showing the optical monochrome Telefunken test card T05.

Formerly a common sight, test cards are now only rarely seen outside of television studios, post-production, and distribution facilities. In particular, they are no longer intended to assist viewers in calibration of television sets. Several things have led to their demise for this purpose:

  • Modern microcontroller-controlled analogue televisions rarely if ever need adjustment, so test cards are much less important than previously. Likewise, modern cameras and camcorders seldom need adjustment for technical accuracy, though they are often adjusted to compensate for scene light levels, and for various artistic effects.
  • Use of digital interconnect standards, such as CCIR 601 and SMPTE 292M, which operate without the non-linearities and other issues inherent to analogue broadcasting, do not introduce colour shifts or brightness changes; thus the requirement to detect and compensate for them using this reference signal has been virtually eliminated. (Compare with the obsolescence of stroboscopes as used to adjust the speed of record players). On the other hand, digital test signal generators do include test signals which are intended to stress the digital interface, and many sophisticated generators allow the insertion of jitter, bit errors, and other pathological conditions that can cause a digital interface to fail.
  • Likewise, use of digital broadcasting standards such as the DVB and ATSC eliminates the issues introduced by modulation and demodulation of analogue signals.
  • Test cards including large circles were used to confirm the linearity of the set's deflection systems. As solid-state components replaced vacuum tubes in receiver deflection circuits, linearity adjustments were less frequently required (few newer sets have user-adjustable "VERT SIZE" and "VERT LIN" controls, for example). In LCD and other deflectionless displays, the linearity is a function of the display panel's manufacturing quality; for the display to work, the tolerances will already be far tighter than human perception.

In developed countries such as the United Kingdom, Australia, and the United States, the financial imperatives of commercial television broadcasting mean that air-time is now typically filled with programmes and commercials (such as infomercials) 24 hours a day, and non-commercial broadcasters have to match this.

In North America, most test cards such as the famous Indian-head test pattern of the 1950s and 1960s have long been relegated to history. The SMPTE color bars occasionally turn up, but with most North American broadcasters now following a 24-hour schedule, these too have become a rare sight.

Monoscope[edit]

Close-up of the test-card image from a monoscope

Rather than physical test cards, which had to be televised using a camera, television stations often used a special purpose camera tube which had the test pattern painted on the inside screen of the tube. Each tube was only capable of generating the one test image, hence it was called a monoscope.

Monoscopes were similar in construction to an ordinary cathode ray tube (CRT), only instead of displaying an image on its screen it scanned a built-in image. The monoscope contained a formed metal target in place of the phosphor coating at its "screen" end and as the electron beam scanned the target, rather than displaying an image, a varying electrical signal was produced generating a video signal from the etched pattern. Monoscope tubes had the advantage over test cards that a full TV camera was not needed, and the image was always properly framed and in focus. They fell out of use in the 1960s as they were not able to produce color images.

Test patterns for photocopiers[edit]

A lesser-known kind of test pattern is used for the calibration of photocopiers.[1][2] Photocopier test patterns are physical sheets that are photocopied, with the difference in the resulting photocopy revealing any telltale deviations or defects in the machine's ability to copy.

In numismatics[edit]

Television has had such an impact in today's life that it has been the main motif for numerous collectors' coins and medals. One of the most recent examples is The 50 Years of Television commemorative coin minted on March 9, 2005, in Austria. The obverse of the coin shows a "test pattern", while the reverse shows several milestones in the history of television.

See also[edit]

References[edit]

  1. ^ "Samsung SF531P PCSTATS Review – Printer Test Patterns". Pcstats.com. 2007-10-15. Retrieved 2010-01-01.
  2. ^ "Projection: Room A / Room B". Thing.net. Retrieved 2010-01-01.

External links[edit]