Loop gain
In electronics and control system theory, loop gain is the sum of the gain, expressed as a ratio or in decibels, around a feedback loop. Feedback loops are widely used in electronics in amplifiers and oscillators, and more generally in both electronic and nonelectronic industrial control systems to control industrial plant and equipment. The concept is also used in biology. In a feedback loop, the output of a device, process or plant is sampled and applied to alter the input, to better control the output. The loop gain, along with the related concept of loop phase shift, determines the behavior of the device, and particularly whether the output is stable, or unstable, which can result in oscillation. The importance of loop gain as a parameter for characterizing electronic feedback amplifiers was first recognized by Heinrich Barkhausen in 1921, and was developed further by Hendrik Wade Bode and Harry Nyquist at Bell Labs in the 1930s.
A block diagram of an electronic amplifier with negative feedback is shown at right. The input signal is applied to the amplifier with open-loop gain A and amplified. The output of the amplifier is applied to a feedback network with gain β, and subtracted from the input to the amplifier. The loop gain is calculated by imagining the feedback loop is broken at some point, and calculating the net gain if a signal is applied. In the diagram shown, the loop gain is the product of the gains of the amplifier and the feedback network, −Aβ. The minus sign is because the feedback signal is subtracted from the input.
The gains A and β, and therefore the loop gain, generally vary with the frequency of the input signal, and so are usually expressed as functions of the angular frequency ω in radians per second. It is often displayed as a graph with the horizontal axis frequency ω and the vertical axis gain. In amplifiers, the loop gain is the difference between the open-loop gain curve and the closed-loop gain curve (actually, the 1/β curve) on a dB scale.[1][2][3]
See also[edit]
- Phase margin and gain margin
- Nyquist plot
- In telecommunications, the term "loop gain" can refer to the total usable power gain of a carrier terminal or two-wire repeater. The maximum usable gain is determined by, and may not exceed, the losses in the closed path.
References[edit]
- ^ "TI Precision Labs - Op-amps - Stability 2" (PDF).
To find the magnitude of AolB, we can simply subtract 1/B from Aol.
- ^ "MT-033 TUTORIAL Voltage Feedback Op Amp Gain and Bandwidth" (PDF).
The difference between the open-loop gain and the closed-loop gain is known as the loop gain
- ^ "Operational amplifier gain stability, Part 2: DC gain-error analysis" (PDF).
... shows the simplified open-loop gain ... along with the closed-loop gain ... The difference between these two curves is the loop gain, β×AOL.
External links[edit]
 | This article related to telecommunications is a stub. You can help Wikipedia by expanding it. |
This article incorporates public domain material from the General Services Administration document "Federal Standard 1037C" (in support of MIL-STD-188).
