Division algorithm

This article is about algorithms for division. For the theorem proving the existence of a unique quotient and remainder, see Euclidean division.

A division algorithm is an algorithm which, given two integers N and D, computes their quotient and/or remainder, the result of division. Some are applied by hand, while others are employed by digital circuit designs and software.

Division algorithms fall into two main categories: slow division and fast division. Slow division algorithms produce one digit of the final quotient per iteration. Examples of slow division include restoring, non-performing restoring, non-restoring, and SRT division. Fast division methods start with a close approximation to the final quotient and produce twice as many digits of the final quotient on each iteration. Newton–Raphson and Goldschmidt fall into this category.

Discussion will refer to the form $N/D=(Q,R)$, where

• N = Numerator (dividend)
• D = Denominator (divisor)

is the input, and

• Q = Quotient
• R = Remainder

is the output.

Division by repeated subtraction

The simplest division algorithm, historically incorporated into a greatest common divisor algorithm presented in Euclid's Elements, Book VII, Proposition 1, finds the remainder given two positive integers using only subtractions and comparisons:

while N ≥ D do
  N := N − D
end
return N

The proof that the quotient and remainder exist and are unique (described at Euclidean division) gives rise to a complete division algorithm using additions, subtractions, and comparisons:

function divide(N, D)
  if D = 0 then error(DivisionByZero) end
  if D < 0 then (Q, R) := divide(N, −D); return (−Q, R) end
  if N < 0 then
    (Q,R) := divide(−N, D)
    if R = 0 then return (−Q, 0)
    else return (−Q − 1, D − R) end
  end
  -- At this point, N ≥ 0 and D > 0
  return divide_unsigned(N, D)
end  
function divide_unsigned(N, D)
  Q := 0; R := N
  while R ≥ D do
    Q := Q + 1
    R := R − D
  end
  return (Q, R)
end

This procedure always produces R ≥ 0. Although very simple, it takes Ω(Q) steps, and so is exponentially slower than even slow division algorithms like long division. It is useful if Q is known to be small (being an output-sensitive algorithm), and can serve as an executable specification.

Long division

Main article: Long division

Long division is the standard algorithm used for pen-and-paper division of multidigit numbers expressed in decimal notation. It shifts gradually from the left to the right end of the dividend, subtracting the largest possible multiple of the divisor at each stage; the multiples become the digits of the quotient, and the final difference is the remainder. When used with a binary radix, it forms the basis for the integer division (unsigned) with remainder algorithm below. Short division is an abbreviated form of long division suitable for one-digit divisors. Chunking (also known as the partial quotients method or the hangman method) is a less-efficient form of long division which may be easier to understand.

Integer division (unsigned) with remainder

The following algorithm, the binary version of the famous long division, will divide N by D, placing the quotient in Q and the remainder in R. In the following code, all values are treated as unsigned integers.

if D = 0 then error(DivisionByZeroException) end
Q := 0                  -- Initialize quotient and remainder to zero
R := 0                     
for i := n − 1 .. 0 do  -- Where n is number of bits in N
  R := R << 1           -- Left-shift R by 1 bit
  R(0) := N(i)          -- Set the least-significant bit of R equal to bit i of the numerator
  if R ≥ D then
    R := R − D
    Q(i) := 1
  end
end

Example

If we take N=1100₂ (12₁₀) and D=100₂ (4₁₀)

Step 1: Set R=0 and Q=0
Step 2: Take i=3 (one less than the number of bits in N)
Step 3: R=00 (left shifted by 1)
Step 4: R=01 (setting R(0) to N(i))
Step 5: R<D, so skip statement

Step 2: Set i=2
Step 3: R=010
Step 4: R=011
Step 5: R<D, statement skipped

Step 2: Set i=1
Step 3: R=0110
Step 4: R=0110
Step 5: R>=D, statement entered
Step 5b: R=10 (R−D)
Step 5c: Q=10 (setting Q(i) to 1)

Step 2: Set i=0
Step 3: R=100
Step 4: R=100
Step 5: R>=D, statement entered
Step 5b: R=0 (R−D)
Step 5c: Q=11 (setting Q(i) to 1)

end
Q=11₂ (3₁₀) and R=0.

Slow division methods

Slow division methods are all based on a standard recurrence equation

$R_{j+1}=B\times R_{j}-q_{n-(j+1)}\times D\,$,

where:

• R_j is the j-th partial remainder of the division
• B is the radix (base, usually 2 internally in computers and calculators)
• q _{n − (j + 1)} is the digit of the quotient in position n−(j+1), where the digit positions are numbered from least-significant 0 to most significant n−1
• n is number of digits in the quotient
• D is the divisor

Restoring division

Restoring division operates on fixed-point fractional numbers and depends on the following assumptions:

• D < N
• 0 < N, 0 < D

The quotient digits q are formed from the digit set {0,1}.

The basic algorithm for binary (radix 2) restoring division is:

R := N
D := D << n            -- R and D need twice the word width of N and Q
for i := n − 1 .. 0 do  -- For example 31..0 for 32 bits
  R := 2 * R − D          -- Trial subtraction from shifted value (multiplication by 2 is a shift in binary representation)
  if R ≥ 0 then
    q(i) := 1          -- Result-bit 1
  else
    q(i) := 0          -- Result-bit 0
    R := R + D         -- New partial remainder is (restored) shifted value
  end
end

-- Where: N = Numerator, D = Denominator, n = #bits, R = Partial remainder, q(i) = bit #i of quotient

The above restoring division algorithm can avoid the restoring step by saving the shifted value 2R before the subtraction in an additional register T (i.e., T = R << 1) and copying register T to R when the result of the subtraction 2R − D is negative.

Non-performing restoring division is similar to restoring division except that the value of 2R is saved, so D does not need to be added back in for the case of R < 0.

Non-restoring division

Non-restoring division uses the digit set {−1, 1} for the quotient digits instead of {0, 1}. The algorithm is more complex, but has the advantage when implemented in hardware that there is only one decision and addition/subtraction per quotient bit; there is no restoring step after the subtraction. This lets it be executed faster. The basic algorithm for binary (radix 2) non-restoring division of non-negative numbers is:

R := N
D := D << n            -- R and D need twice the word width of N and Q
for i = n − 1 .. 0 do  -- for example 31..0 for 32 bits
  if R >= 0 then
    q[i] := +1
    R := 2 * R − D
  else
    q[i] := −1
    R := 2 * R + D
  end if
end
 
-- Note: N=Numerator, D=Denominator, n=#bits, R=Partial remainder, q(i)=bit #i of quotient.

Following this algorithm, the quotient is in a non-standard form consisting of digits of −1 and +1. This form needs to be converted to binary to form the final quotient. Example:

Convert the following quotient to the digit set {0,1}:
Start:	$Q=111{\bar {1}}1{\bar {1}}1{\bar {1}}$
1. Form the positive term:	$P=11101010\,$
2. Mask the negative term*:	$M=00010101\,$
3. Subtract: $P-M$:	$Q=11010101\,$
*.( Signed binary notation with One's complement without Two's Complement )

If the −1 digits of $Q$ are stored as zeros (0) as is common, then $P$ is $Q$ and computing $M$ is trivial: perform a one's complement (bit by bit complement) on the original $Q$.

Q := Q − bit.bnot(Q)      * Appropriate if −1 Digits in Q are Represented as zeros as is common.

Finally, quotients computed by this algorithm are always odd, and the remainder in R is in the range −D ≤ R < D. For example, 5 / 2 = 3 R −1. To convert to a positive remainder, do a single restoring step after Q is converted from non-standard form to standard form:

if R < 0 then
   Q := Q − 1
   R := R + D  -- Needed only if the Remainder is of interest.
end if

The actual remainder is R >> n. (As with restoring division, the low-order bits of R are used up at the same rate as bits of the quotient Q are produced, and it is common to use a single shift register for both.)

SRT division

Named for its creators (Sweeney, Robertson, and Tocher), SRT division is a popular method for division in many microprocessor implementations. SRT division is similar to non-restoring division, but it uses a lookup table based on the dividend and the divisor to determine each quotient digit.

The most significant difference is that a redundant representation is used for the quotient. For example, when implementing radix-4 SRT division, each quotient digit is chosen from five possibilities: { −2, −1, 0, +1, +2 }. Because of this, the choice of a quotient digit need not be perfect; later quotient digits can correct for slight errors. (For example, the quotient digit pairs (0, +2) and (1, −2) are equivalent, since 0×4+2 = 1×4−2.) This tolerance allows quotient digits to be selected using only a few most-significant bits of the dividend and divisor, rather than requiring a full-width subtraction. This simplification in turn allows a radix higher than 2 to be used.

Like non-restoring division, the final steps are a final full-width subtraction to resolve the last quotient bit, and conversion of the quotient to standard binary form.

The Intel Pentium processor's infamous floating-point division bug was caused by an incorrectly coded lookup table. Five of the 1066 entries had been mistakenly omitted.

Fast division methods

Newton–Raphson division

Newton–Raphson uses Newton's method to find the reciprocal of $D$ and multiply that reciprocal by $N$ to find the final quotient $Q$.

The steps of Newton–Raphson division are:

1. Calculate an estimate $X_{0}$ for the reciprocal $1/D$ of the divisor $D$.
2. Compute successively more accurate estimates $X_{1},X_{2},\ldots ,X_{S}$ of the reciprocal. This is where one employs the Newton–Raphson method as such.
3. Compute the quotient by multiplying the dividend by the reciprocal of the divisor: $Q=NX_{S}$.

In order to apply Newton's method to find the reciprocal of $D$, it is necessary to find a function $f(X)$ that has a zero at $X=1/D$. The obvious such function is $f(X)=DX-1$, but the Newton–Raphson iteration for this is unhelpful, since it cannot be computed without already knowing the reciprocal of $D$ (moreover it attempts to compute the exact reciprocal in one step, rather than allow for iterative improvements). A function that does work is $f(X)=(1/X)-D$, for which the Newton–Raphson iteration gives

$X_{i+1}=X_{i}-{f(X_{i}) \over f'(X_{i})}=X_{i}-{1/X_{i}-D \over -1/X_{i}^{2}}=X_{i}+X_{i}(1-DX_{i})=X_{i}(2-DX_{i}),$

which can be calculated from $X_{i}$ using only multiplication and subtraction, or using two fused multiply–adds.

From a computation point of view, the expressions $X_{i+1}=X_{i}+X_{i}(1-DX_{i})$ and $X_{i+1}=X_{i}(2-DX_{i})$ are not equivalent. To obtain a result with a precision of 2n bits while making use of the second expression, one must compute the product between $X_{i}$ and $(2-DX_{i})$ with double the given precision of $X_{i}$(n bits). In contrast, the product between $X_{i}$ and $(1-DX_{i})$ need only be computed with a precision of n bits, because the leading n bits (after the binary point) of $(1-DX_{i})$ are zeros.

If the error is defined as $\epsilon _{i}=1-DX_{i}$, then:

${\begin{aligned}\epsilon _{i+1}&=1-DX_{i+1}\\&=1-D(X_{i}(2-DX_{i}))\\&=1-2DX_{i}+D^{2}X_{i}^{2}\\&=(1-DX_{i})^{2}\\&={\epsilon _{i}}^{2}.\\\end{aligned}}$

This squaring of the error at each iteration step — the so-called quadratic convergence of Newton–Raphson's method — has the effect that the number of correct digits in the result roughly doubles for every iteration, a property that becomes extremely valuable when the numbers involved have many digits (e.g. in the large integer domain). But it also means that the initial convergence of the method can be comparatively slow, especially if the initial estimate $X_{0}$ is poorly chosen.

For the subproblem of choosing an initial estimate $X_{0}$, it is convenient to apply a bit-shift to the divisor D to scale it so that 0.5 ≤ D ≤ 1; by applying the same bit-shift to the numerator N, one ensures the quotient does not change. Then one could use a linear approximation in the form

$X_{0}=T_{1}+T_{2}D\approx {\frac {1}{D}}\,$

to initialize Newton–Raphson. To minimize the maximum of the absolute value of the error of this approximation on interval $[0.5,1]$, one should use

$X_{0}={48 \over 17}-{32 \over 17}D.\,$

The coefficients of the linear approximation are determined as follows. The absolute value of the error is $|\epsilon _{0}|=|1-D(T_{1}+T_{2}D)|$. The minimum of the maximum absolute value of the error is determined by the Chebyshev equioscillation theorem applied to $F(D)=1-D(T_{1}+T_{2}D)$. The local minimum of $F(D)$ occurs when $F'(D)=0$, which has solution $D=-T_{1}/(2T_{2})$. The function at that minimum must be of opposite sign as the function at the endpoints, namely, $F(1/2)=F(1)=-F(-T_{1}/(2T_{2}))$. The two equations in the two unknowns have a unique solution $T_{1}=48/17$ and $T_{2}=-32/17$, and the maximum error is $F(1)=1/17$. Using this approximation, the absolute value of the error of the initial value is less than

$\vert \epsilon _{0}\vert \leq {1 \over 17}\approx 0.059.\,$

It is possible to generate a polynomial fit of degree larger than 1, computing the coefficients using the Remez algorithm. The trade-off is that the initial guess requires more computational cycles but hopefully in exchange for fewer iterations of Newton–Raphson.

Since for this method the convergence is exactly quadratic, it follows that

$S=\left\lceil \log _{2}{\frac {P+1}{\log _{2}17}}\right\rceil \,$

steps are enough to calculate the value up to $P\,$ binary places. This evaluates to 3 for IEEE single precision and 4 for both double precision and double extended formats.

Pseudocode

The following computes the quotient of N and D with a precision of P binary places:

Express D as M × 2e where 1 ≤ M < 2 (standard floating point representation)
D' := D / 2e+1   // scale between 0.5 and 1, can be performed with bit shift / exponent subtraction
N' := N / 2e+1
X := 48/17 − 32/17 × D'   // precompute constants with same precision as D
repeat $\left\lceil \log _{2}{\frac {P+1}{\log _{2}17}}\right\rceil \,$ times   // can be precomputed based on fixed P
    X := X + X × (1 - D' × X)
end
return N' × X

For example, for a double-precision floating-point division, this method uses 10 multiplies, 9 adds, and 2 shifts.

Variant Newton-Raphson division

The Newton-Raphson division method can be modified to be slightly faster as follows. After shifting N and D so that D is in [0.5, 1.0], initialize with

$X:={\frac {140}{33}}+D\cdot \left({\frac {-64}{11}}+D\cdot {\frac {256}{99}}\right).$

This is the best quadratic fit to 1/D and gives an absolute value of the error less than or equal to 1/99. It is chosen to make the error equal to a re-scaled third order Chebyshev polynomial of the first kind. The coefficients should be pre-calculated and hard-coded.

Then in the loop, use an iteration which cubes the error.

$E:=1-D\cdot X$

$Y:=X\cdot E$

$X:=X+Y+Y\cdot E.$

The Y·E term is new.

If the loop is performed until X agrees with 1/D on its leading P bits, then the number of iterations will be no more than

$\left\lceil \log _{3}\left({\frac {P+1}{\log _{2}99}}\right)\right\rceil$

which is the number of times 99 must be cubed to get to 2^P+1. Then

$Q:=N\cdot X$

is the quotient to P bits.

Using higher degree polynomials in either the initialization or the iteration results in a degradation of performance because the extra multiplications required would be better spent on doing more iterations.

Goldschmidt division

Goldschmidt division (after Robert Elliott Goldschmidt) uses an iterative process of repeatedly multiplying both the dividend and divisor by a common factor F_i, chosen such that the divisor converges to 1. This causes the dividend to converge to the sought quotient Q:

$Q={\frac {N}{D}}{\frac {F_{1}}{F_{1}}}{\frac {F_{2}}{F_{2}}}{\frac {F_{\ldots }}{F_{\ldots }}}.$

The steps for Goldschmidt division are:

1. Generate an estimate for the multiplication factor F_i .
2. Multiply the dividend and divisor by F_i .
3. If the divisor is sufficiently close to 1, return the dividend, otherwise, loop to step 1.

Assuming N/D has been scaled so that 0 < D < 1, each F_i is based on D:

$F_{i+1}=2-D_{i}.$

Multiplying the dividend and divisor by the factor yields:

${\frac {N_{i+1}}{D_{i+1}}}={\frac {N_{i}}{D_{i}}}{\frac {F_{i+1}}{F_{i+1}}}.$

After a sufficient number k of iterations $Q=N_{k}$.

The Goldschmidt method is used in AMD Athlon CPUs and later models.

Binomial theorem

The Goldschmidt method can be used with factors that allow simplifications by the binomial theorem. Assume N/D has been scaled by a power of two such that $D\in ({\tfrac {1}{2}},1]$. We choose $D=1-x$ and $F_{i}=1+x^{2^{i}}$. This yields

${\frac {N}{1-x}}={\frac {N\cdot (1+x)}{1-x^{2}}}={\frac {N\cdot (1+x)\cdot (1+x^{2})}{1-x^{4}}}=\cdots =Q'={\frac {N'=N\cdot (1+x)\cdot (1+x^{2})\cdot \cdot \cdot (1+x^{2^{(n-1)}})}{D'=1-x^{2^{n}}\approx 1}}$.

After $n$ steps $(x\in [0,{\tfrac {1}{2}}))$, the denominator $1-x^{2^{n}}$ can be rounded to $1$ with a relative error

$\epsilon _{n}={\frac {Q'-N'}{Q'}}=x^{2^{n}}$

which is maximum at $2^{-2^{n}}$ when $x={1 \over 2}$, thus providing a minimum precision of $2^{n}$ binary digits.

Large-integer methods

Methods designed for hardware implementation generally do not scale to integers with thousands or millions of decimal digits; these frequently occur, for example, in modular reductions in cryptography. For these large integers, more efficient division algorithms transform the problem to use a small number of multiplications, which can then be done using an asymptotically efficient multiplication algorithm such as the Karatsuba algorithm, Toom–Cook multiplication or the Schönhage–Strassen algorithm. The result is that the computational complexity of the division is of the same order (up to a multiplicative constant) as that of the multiplication. Examples include reduction to multiplication by Newton's method as described above, as well as the slightly faster Barrett reduction and Montgomery reduction algorithms. Newton's method is particularly efficient in scenarios where one must divide by the same divisor many times, since after the initial Newton inversion only one (truncated) multiplication is needed for each division.

Division by a constant

The division by a constant D is equivalent to the multiplication by its reciprocal. Since the denominator is constant, so is its reciprocal (1/D). Thus it is possible to compute the value of (1/D) once at compile time, and at run time perform the multiplication N·(1/D) rather than the division N/D. In floating-point arithmetic the use of (1/D) presents little problem, but in integer arithmetic the reciprocal will always evaluate to zero (assuming |D| > 1).

It is not necessary to use specifically (1/D); any value (X/Y) that reduces to (1/D) may be used. For example, for division by 3, the factors 1/3, 2/6, 3/9, or 194/582 could be used. Consequently, if Y were a power of two the division step would reduce to a fast right bit shift. The effect of calculating N/D as (N·X)/Y replaces a division with a multiply and a shift. Note that the parentheses are important, as N·(X/Y) will evaluate to zero.

However, unless D itself is a power of two, there is no X and Y that satisfies the conditions above. Fortunately, (N·X)/Y gives exactly the same result as N/D in integer arithmetic even when (X/Y) is not exactly equal to 1/D, but "close enough" that the error introduced by the approximation is in the bits that are discarded by the shift operation.

As a concrete fixed-point arithmetic example, for 32-bit unsigned integers, division by 3 can be replaced with a multiply by 2863311531/2³³, a multiplication by 2863311531 (hexadecimal 0xAAAAAAAB) followed by a 33 right bit shift. The value of 2863311531 is calculated as 2³³/3, then rounded up.

Likewise, division by 10 can be expressed as a multiplication by 3435973837 (0xCCCCCCCD) followed by division by 2³⁵ (or 35 right bit shift).

In some cases, division by a constant can be accomplished in even less time by converting the "multiply by a constant" into a series of shifts and adds or subtracts. Of particular interest is division by 10, for which the exact quotient is obtained, with remainder if required.

Rounding error

Round-off error can be introduced by division operations due to limited precision.

Further information: Floating point

See also

• Multiplication algorithm
• Pentium FDIV bug

Further reading

• Warren Jr., Henry S. (2013). Hacker's Delight (2 ed.). Addison Wesley - Pearson Education, Inc. ISBN 978-0-321-84268-8.
• Savard, John J. G. (2018) [2006]. "Advanced Arithmetic Techniques". quadibloc. Archived from the original on 2018-07-03. Retrieved 2018-07-16.

External links

• Computer Arithmetic Algorithms JavaScript Simulator – contains simulators for many different division algorithms
• Doras, Cory (19 October 2011). "Labor of Division (Episode III): Faster Unsigned Division by Constants" (PDF). ridiculous_fish. (Extends division by constants.)
• http://www.dauniv.ac.in/downloads/CArch_PPTs/CompArchCh03L07IntegerDivision.pdf
• http://www.seas.ucla.edu/~ingrid/ee213a/lectures/division_presentV2.pdf
• http://www.m1c4a1.wz.cz/docs/goldschmidt.pdf