From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Backpropagation is a method used in artificial neural networks to calculate a gradient that is needed in the calculation of the weights to be used in the network.[1] Backpropagation is shorthand for "the backward propagation of errors," since an error is computed at the output and distributed backwards throughout the network’s layers.[2] It is commonly used to train deep neural networks.[3][4]

Backpropagation is a generalization of the delta rule to multi-layered feedforward networks, made possible by using the chain rule to iteratively compute gradients for each layer. It is closely related to the Gauss–Newton algorithm and is part of continuing research in neural backpropagation.

Backpropagation is a special case of a more general technique called automatic differentiation. In the context of learning, backpropagation is commonly used by the gradient descent optimization algorithm to adjust the weight of neurons by calculating the gradient of the loss function.


The goal of any supervised learning algorithm is to find a function that best maps a set of inputs to their correct output. The motivation for backpropagation is to train a multi-layered neural network such that it can learn the appropriate internal representations to allow it to learn any arbitrary mapping of input to output.[5]


Learning as an optimization problem[edit]

To understand the mathematical derivation of the backpropagation algorithm, it helps to first develop some intuition about the relationship between the actual output of a neuron and the correct output for a particular training example. Consider a simple neural network with two input units, one output unit and no hidden units. Each neuron uses a linear output[note 1] that is the weighted sum of its input.

A simple neural network with two input units and one output unit

Initially, before training, the weights will be set randomly. Then the neuron learns from training examples, which in this case consist of a set of tuples where and are the inputs to the network and t is the correct output (the output the network should produce given those inputs, when it has been trained). The initial network, given and , will compute an output y that likely differs from t (given random weights). A common method for measuring the discrepancy between the expected output t and the actual output y is the squared error measure:

where E is the discrepancy or error.

As an example, consider the network on a single training case: , thus the input and are 1 and 1 respectively and the correct output, t is 0. Now if the actual output y is plotted on the horizontal axis against the error E on the vertical axis, the result is a parabola. The minimum of the parabola corresponds to the output y which minimizes the error E. For a single training case, the minimum also touches the horizontal axis, which means the error will be zero and the network can produce an output y that exactly matches the expected output t. Therefore, the problem of mapping inputs to outputs can be reduced to an optimization problem of finding a function that will produce the minimal error.

Error surface of a linear neuron for a single training case

However, the output of a neuron depends on the weighted sum of all its inputs:

where and are the weights on the connection from the input units to the output unit. Therefore, the error also depends on the incoming weights to the neuron, which is ultimately what needs to be changed in the network to enable learning. If each weight is plotted on a separate horizontal axis and the error on the vertical axis, the result is a parabolic bowl. For a neuron with k weights, the same plot would require an elliptic paraboloid of dimensions.

Error surface of a linear neuron with two input weights

One commonly used algorithm to find the set of weights that minimizes the error is gradient descent. Backpropagation is then used to calculate the steepest descent direction.

Derivation for a single-layered network[edit]

The gradient descent method involves calculating the derivative of the squared error function with respect to the weights of the network. This is normally done using backpropagation. Assuming one output neuron,[note 2] the squared error function is:


is the squared error,
is the target output for a training sample, and
is the actual output of the output neuron.

The factor of is included to cancel the exponent when differentiating. Later, the expression will be multiplied with an arbitrary learning rate, so that it doesn't matter if a constant coefficient is introduced now.

For each neuron , its output is defined as

The input to a neuron is the weighted sum of outputs of previous neurons. If the neuron is in the first layer after the input layer, the of the input layer are simply the inputs to the network. The number of input units to the neuron is . The variable denotes the weight between neurons and .

The activation function is non-linear and differentiable. A commonly used activation function is the logistic function:

which has a convenient derivative of:

Finding the derivative of the error[edit]

Calculating the partial derivative of the error with respect to a weight is done using the chain rule twice:

In the last factor of the right-hand side of the above, only one term in the sum depends on , so that

If the neuron is in the first layer after the input layer, is just .

The derivative of the output of neuron with respect to its input is simply the partial derivative of the activation function (assuming here that the logistic function is used):

This is the reason why backpropagation requires the activation function to be differentiable. (Nevertheless, the ReLU activation function, which is non-differentiable at 0, has become quite popular recently, e.g. in AlexNet)

The first factor is straightforward to evaluate if the neuron is in the output layer, because then and

However, if is in an arbitrary inner layer of the network, finding the derivative with respect to is less obvious.

Considering as a function of the inputs of all neurons receiving input from neuron ,

and taking the total derivative with respect to , a recursive expression for the derivative is obtained:

Therefore, the derivative with respect to can be calculated if all the derivatives with respect to the outputs of the next layer – the one closer to the output neuron – are known.

Putting it all together:


To update the weight using gradient descent, one must choose a learning rate, . The change in weight needs to reflect the impact on of an increase or decrease in . If , an increase in increases ; conversely, if , an increase in decreases . The new is added to the old weight, and the product of the learning rate and the gradient, multiplied by guarantees that changes in a way that always decreases . In other words, in the equation immediately below, always changes in such a way that is decreased:

Loss function[edit]

The loss function is a function that maps values of one or more variables onto a real number intuitively representing some "cost" associated with those values. For backpropagation, the loss function calculates the difference between the network output and its expected output, after a training example has propagated through the network.


The mathematical expression of the loss function must fullfill two conditions in order for it to be possibly used in back propagation.[6] The first is that it can be written as an average over error functions , for individual training examples, . The reason for this assumption is that the backpropagation algorithm calculates the gradient of the error function for a single training example, which needs to be generalized to the overall error function. The second assumption is that it can be written as a function of the outputs from the neural network.

Example loss function[edit]

Let be vectors in .

Select an error function measuring the difference between two outputs. The standard choice is the square of the Euclidean distance between the vectors and :

The error function over training examples can then be written as an average of losses over individual examples:


Gradient descent can find the local minimum instead of the global minimum.
  • Gradient descent with backpropagation is not guaranteed to find the global minimum of the error function, but only a local minimum; also, it has trouble crossing plateaus in the error function landscape. This issue, caused by the non-convexity of error functions in neural networks, was long thought to be a major drawback, but Yann LeCun et al. argue that in many practical problems, it is not.[7]
  • Backpropagation learning does not require normalization of input vectors; however, normalization could improve performance.[8]


The basics of continuous backpropagation were derived in the context of control theory by Henry J. Kelley[9] in 1960 and by Arthur E. Bryson in 1961.[10][11][12][13][14][15] They used principles of dynamic programming. In 1962, Stuart Dreyfus published a simpler derivation based only on the chain rule.[16] Bryson and Ho described it as a multi-stage dynamic system optimization method in 1969.[17][18]

Backpropagation was derived by multiple researchers in the early 60's[19] and implemented to run on computers as early as 1970 by Seppo Linnainmaa[20][21][22] Examples of 1960s researchers include Arthur E. Bryson and Yu-Chi Ho in 1969.[23][24] Paul Werbos was first in the US to propose that it could be used for neural nets after analyzing it in depth in his 1974 PhD Thesis.[25] In 1986, through the work of David E. Rumelhart, Geoffrey E. Hinton, Ronald J. Williams[26], and James McClelland[27], backpropagation gained recognition.

In 1970 Linnainmaa published the general method for automatic differentiation (AD) of discrete connected networks of nested differentiable functions.[21][22] This corresponds to backpropagation, which is efficient even for sparse networks.[14][15][28][29]

In 1973 Dreyfus used backpropagation to adapt parameters of controllers in proportion to error gradients.[30] In 1974 Werbos mentioned the possibility of applying this principle to artificial neural networks,[31] and in 1982 he applied Linnainmaa's AD method to neural networks in the way that is used today.[15][32]

In 1986 Rumelhart, Hinton and Williams showed experimentally that this method can generate useful internal representations of incoming data in hidden layers of neural networks.[5][33] In 1993, Wan was the first[14] to win an international pattern recognition contest through backpropagation.[34]

During the 2000s it fell out of favour, but returned in the 2010s, benefitting from cheap, powerful GPU-based computing systems. This has been especially so in language structure learning research, where the connectionist models using this algorithm have been able to explain a variety of phenomena related to first[35] and second language learning.[36]

See also[edit]


  1. ^ One may notice that multi-layer neural networks use non-linear activation functions, so an example with linear neurons seems obscure. However, even though the error surface of multi-layer networks are much more complicated, locally they can be approximated by a paraboloid. Therefore, linear neurons are used for simplicity and easier understanding.
  2. ^ There can be multiple output neurons, in which case the error is the squared norm of the difference vector.


  1. ^ Goodfellow, Ian; Bengio, Yoshua; Courville, Aaaron (2016) Deep Learning. MIT Press. p. 196. ISBN 9780262035613
  2. ^ "What is Backpropagation?".
  3. ^ Nielsen, Michael A. (2015). "Chapter 6". Neural Networks and Deep Learning.
  4. ^ "Deep Networks: Overview - Ufldl". Retrieved 2017-08-04.
  5. ^ a b Rumelhart, David E.; Hinton, Geoffrey E.; Williams, Ronald J. (8 October 1986). "Learning representations by back-propagating errors". Nature. 323 (6088): 533–536. Bibcode:1986Natur.323..533R. doi:10.1038/323533a0.
  6. ^ Nielsen, Michael A. (2015-01-01). "Neural Networks and Deep Learning".
  7. ^ LeCun, Yann; Bengio, Yoshua; Hinton, Geoffrey (2015). "Deep learning". Nature. 521 (7553): 436–444. Bibcode:2015Natur.521..436L. doi:10.1038/nature14539. PMID 26017442.
  8. ^ Buckland, Matt; Collins, Mark. AI Techniques for Game Programming. ISBN 978-1-931841-08-5.
  9. ^ Kelley, Henry J. (1960). "Gradient theory of optimal flight paths". ARS Journal. 30 (10): 947–954. Bibcode:1960ARSJ...30.1127B. doi:10.2514/8.5282.
  10. ^ Arthur E. Bryson (1961, April). A gradient method for optimizing multi-stage allocation processes. In Proceedings of the Harvard Univ. Symposium on digital computers and their applications.
  11. ^ Dreyfus, Stuart E. (1990). "Artificial neural networks, back propagation, and the Kelley-Bryson gradient procedure". Journal of Guidance, Control, and Dynamics. 13 (5): 926–928. Bibcode:1990JGCD...13..926D. doi:10.2514/3.25422.
  12. ^ Stuart Dreyfus (1990). Artificial Neural Networks, Back Propagation and the Kelley-Bryson Gradient Procedure. J. Guidance, Control and Dynamics, 1990.
  13. ^ Mizutani, Eiji; Dreyfus, Stuart; Nishio, Kenichi (July 2000). "On derivation of MLP backpropagation from the Kelley-Bryson optimal-control gradient formula and its application" (PDF). Proceedings of the IEEE International Joint Conference on Neural Networks.
  14. ^ a b c Schmidhuber, Jürgen (2015). "Deep learning in neural networks: An overview". Neural Networks. 61: 85–117. arXiv:1404.7828. doi:10.1016/j.neunet.2014.09.003. PMID 25462637.
  15. ^ a b c Schmidhuber, Jürgen (2015). "Deep Learning". Scholarpedia. 10 (11): 32832. Bibcode:2015SchpJ..1032832S. doi:10.4249/scholarpedia.32832.
  16. ^ Dreyfus, Stuart (1962). "The numerical solution of variational problems". Journal of Mathematical Analysis and Applications. 5 (1): 30–45. doi:10.1016/0022-247x(62)90004-5.
  17. ^ Stuart Russell; Peter Norvig. Artificial Intelligence A Modern Approach. p. 578. The most popular method for learning in multilayer networks is called Back-propagation.
  18. ^ Bryson, A. E.; Yu-Chi, Ho (1 January 1975). Applied Optimal Control: Optimization, Estimation and Control. CRC Press. ISBN 978-0-89116-228-5.
  19. ^ Schmidhuber, Jürgen (2015-01-01). "Deep learning in neural networks: An overview". Neural Networks. 61: 85–117. arXiv:1404.7828. doi:10.1016/j.neunet.2014.09.003. PMID 25462637.
  20. ^ Griewank, Andreas (2012). Who Invented the Reverse Mode of Differentiation?. Optimization Stories, Documenta Matematica, Extra Volume ISMP (2012), 389-400.
  21. ^ a b Seppo Linnainmaa (1970). The representation of the cumulative rounding error of an algorithm as a Taylor expansion of the local rounding errors. Master's Thesis (in Finnish), Univ. Helsinki, 6–7.
  22. ^ a b Linnainmaa, Seppo (1976). "Taylor expansion of the accumulated rounding error". BIT Numerical Mathematics. 16 (2): 146–160. doi:10.1007/bf01931367.
  23. ^ Stuart Russell and Peter Norvig. Artificial Intelligence A Modern Approach. p. 578. The most popular method for learning in multilayer networks is called Back-propagation. It was first invented in 1969 by Bryson and Ho, but was more or less ignored until the mid-1980s.
  24. ^ Bryson, Arthur Earl; Ho, Yu-Chi (1969). Applied optimal control: optimization, estimation, and control. Blaisdell Publishing Company or Xerox College Publishing. p. 481.
  25. ^ Werbos, P. (1974). Beyond Regression: New Tools for Prediction and Analysis in the Behavioral Sciences. PhD thesis, Harvard University.
  26. ^ Rumelhart, David E.; Hinton, Geoffrey E.; Williams, Ronald J. (1986-10-09). "Learning representations by back-propagating errors". Nature. 323 (6088): 533–536. Bibcode:1986Natur.323..533R. doi:10.1038/323533a0.
  27. ^ Rumelhart, David E; Mcclelland, James L (1986-01-01). Parallel distributed processing: explorations in the microstructure of cognition. Volume 1. Foundations.
  28. ^ "Who Invented the Reverse Mode of Differentiation? - Semantic Scholar". 2012. Retrieved 2017-08-04.
  29. ^ Griewank, Andreas; Walther, Andrea (2008). Evaluating Derivatives: Principles and Techniques of Algorithmic Differentiation, Second Edition. SIAM. ISBN 978-0-89871-776-1.
  30. ^ Dreyfus, Stuart (1973). "The computational solution of optimal control problems with time lag". IEEE Transactions on Automatic Control. 18 (4): 383–385. doi:10.1109/tac.1973.1100330.
  31. ^ Werbos, Paul John (1975). Beyond Regression: New Tools for Prediction and Analysis in the Behavioral Sciences. Harvard University.
  32. ^ Werbos, Paul (1982). "Applications of advances in nonlinear sensitivity analysis". System modeling and optimization (PDF). Springer. pp. 762–770.
  33. ^ Alpaydin, Ethem (2010). Introduction to Machine Learning. MIT Press. ISBN 978-0-262-01243-0.
  34. ^ Wan, Eric A. (1993). "Time series prediction by using a connectionist network with internal delay lines" (PDF). SANTA FE INSTITUTE STUDIES IN THE SCIENCES OF COMPLEXITY-PROCEEDINGS. p. 195.
  35. ^ Chang, Franklin; Dell, Gary S.; Bock, Kathryn (2006). "Becoming syntactic". Psychological Review. 113 (2): 234–272. doi:10.1037/0033-295x.113.2.234. PMID 16637761.
  36. ^ Janciauskas, Marius; Chang, Franklin (2017-07-26). "Input and Age-Dependent Variation in Second Language Learning: A Connectionist Account". Cognitive Science. 42: 519–554. doi:10.1111/cogs.12519. PMC 6001481. PMID 28744901.

External links[edit]